Warranty

ManualsBrandsDIGITEN ManualsHVACBBQ Thermostat

Making Life Better

Meat Thermometer

Model: MTB-4P

www.digit-en.com service@digit-en.com

and thermometer.

3. Click on “Add Device” to connect the Grill Meat

Thermometer. After adding the device success-

fully, click “Done”.

4. You can set the Temperature alarm and Time

alarm according to your requirements, and you

can also Set up the probe to choose the type of

meat. The settings will be saved for the next use.

5. To unpair, you must rst unplug all probes,

press the button 3 times quickly, the signal

icon on the screen ashes, which means the

pairing is released.

Warning

● Do not put the unit in high temperature places.

● Do not put probes or metal wire into re or contact

the hot surfaces and heat sources directly.

● Do not touch hot probes with bare hands during

or just after cooking. Please always wear heat-re-

sistant gloves.

● Please rinse or wipe the probe after use, but not

let it soak in water to avoid malfunctions.

● Do not press probes and the metal wire too hard, it

may damage the the plastic lm of the wire and

lead to short circuit.

● Please take o󰀨 the black tip covers before using

the probes.

● Please make sure to enable your Bluetooth on your

phone to be paired correctly.

● Please make sure connecting distance range

within 394ft so as to ensure Bluetooth normal con-

nection (with no obstructions in between)

● Please delete the previous phone connection BBQ

record before changing the new phone to pair, to

ensure that the Bluetooth can be paired normally.

Warranty

DIGITEN products are guaranteed to the original

owner for one year against defects in workmanship

and materials.

Please feel free to contact us if you need support or

meet problems.

service@digit-en.com

www.digit-en.com/support

Summary of content (7 pages)

PAGE 1
and thermometer. 3. Click on “Add Device” to connect the Grill Meat Thermometer. After adding the device successfully, click “Done”. 4. You can set the Temperature alarm and Time alarm according to your requirements, and you can also Set up the probe to choose the type of meat. The settings will be saved for the next use. 5. To unpair, you must first unplug all probes, press the button 3 times quickly, the signal icon on the screen flashes, which means the pairing is released.
PAGE 2
At A Glance Quick Guide 1. Hold and press the Power button for about 3s to turn on/off the thermometer. 2 1 3 2. Short press the button to switch the temperature unit. 4 4 Specification ●● Battery: 1000mAh Built-in Rechargeable Lithium Battery ●● Charger 5 Type: Type-C ●● Short-term Measurement Range: -10℃~300℃ (32℉~572℉) 6 7 8 Insert probe into the thermometer when the power is on, the thermometer will display readings of the current temperature.
PAGE 3
At A Glance Quick Guide 1. Hold and press the Power button for about 3s to turn on/off the thermometer. 2 1 3 2. Short press the button to switch the temperature unit. 4 4 Specification ●● Battery: 1000mAh Built-in Rechargeable Lithium Battery ●● Charger 5 Type: Type-C ●● Short-term Measurement Range: -10℃~300℃ (32℉~572℉) 6 7 8 Insert probe into the thermometer when the power is on, the thermometer will display readings of the current temperature.
PAGE 4
At A Glance Quick Guide 1. Hold and press the Power button for about 3s to turn on/off the thermometer. 2 1 3 2. Short press the button to switch the temperature unit. 4 4 Specification ●● Battery: 1000mAh Built-in Rechargeable Lithium Battery ●● Charger 5 Type: Type-C ●● Short-term Measurement Range: -10℃~300℃ (32℉~572℉) 6 7 8 Insert probe into the thermometer when the power is on, the thermometer will display readings of the current temperature.
PAGE 5
and thermometer. 3. Click on “Add Device” to connect the Grill Meat Thermometer. After adding the device successfully, click “Done”. 4. You can set the Temperature alarm and Time alarm according to your requirements, and you can also Set up the probe to choose the type of meat. The settings will be saved for the next use. 5. To unpair, you must first unplug all probes, press the button 3 times quickly, the signal icon on the screen flashes, which means the pairing is released.
PAGE 6
and thermometer. 3. Click on “Add Device” to connect the Grill Meat Thermometer. After adding the device successfully, click “Done”. 4. You can set the Temperature alarm and Time alarm according to your requirements, and you can also Set up the probe to choose the type of meat. The settings will be saved for the next use. 5. To unpair, you must first unplug all probes, press the button 3 times quickly, the signal icon on the screen flashes, which means the pairing is released.
PAGE 7
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications.