User Guide

To initialize all programs, styles and songs (factory

initialization):

1. Press the Utilities button from any mode; this presents the

UTILITIES main menu.

2. Press the Init softkey; this presents the Initialize Utilities sub-menu.

3. Press the softkey corresponding to All.

4. Press the Store button. A warning tells you that all user programs,

songs and styles will be lost. To cancel the factory initialization,

press the Exit button; otherwise, press the Store button to perform

the initialization. During the initialization process the version screen

will appear; when initialization is complete, factory program F 1 will

be loaded and the unit is ready to use.

Footswitch Utilities

The Studio Vocalist EX Footswitch Utilities allow you to reconfigure the

functions of the DigiTech FS300 3-button footswitch to meet your per-

sonal preferences.

Any button on the FS300 can be configured to control:

• Bypass Latching (BypL) bypass is activated when the

footswitch is pressed and released, stays acti-

vated until the footswitch is pressed and

released again.

• Bypass Momentary (BypM) bypass activated only while

footswitch is held down.

• Program up (Pgm↑)

• Program down (Pgm↓)

• Song up (Sng↑)

• Song down (Sng↓)

• Song Step up (Stp↑)

• Song Step down (Stp↓)

• Data up (Dat↑)

• Data down (Dat↓)

The default switch assignment for the FS300, from left to right, is

Program up Program down Bypass.

To change the assignment of a footswitch button:

1. Press the Utilities button from any mode; this presents the

UTILITIES main menu.

2. Press the Foot softkey; this presents the Footswitch Controls sub-

menu.

3. Press the softkey corresponding to the footswitch button to be reas-

signed, either left, center or right.

Note: The Data up

and down parame-

ters allow you to

duplicate the Data

Wheel using your

footswitch.