User`s guide

SPLIT2 – Стереосигнал гитарной обработки поступает на 1/4”” выходы без Speaker
Compensation. Стереосигнал гитарной обработки, аккомпанемент с
компьютера, микрофон и линейные источники поступают на XLR-выходы без
Speaker Compensation.
The SPLIT1 and SPLIT2 Output Modes are designed for when you want to keep the guitar processing
isolated from mic, line, drums, and audio playback during live performance. The
SPLIT1 Output mode
routes guitar signal to the 1/4” outputs while the mic, line input sources, drums, and audio playback from
the computer are routed out the XLR outputs.
SPLIT2 is the same as SPLIT1 but the guitar signal with
Speaker Compensation is also routed out the XLR outputs.
SPLIT1 - Stereo guitar processing is routed to the 1/4” outputs without Speaker Compensation. Audio
playback from the computer, mic, and line sources are routed to the XLR outputs.
SPLIT2 - Stereo guitar processing is routed to the 1/4” outputs without Speaker Compensation. Stereo
guitar processing, audio playback from the computer, mic, and line sources are routed to the
XLR outputs with Speaker Compensation.
NOTE: Speaker Compensation may affect Mic and Line signals depending on which Output
Mode is selected.
Mic Input
Guitar Input
Line Left
Line Right
micrvb micdry
linrvb
lindry
DRUMS
SC
micfx
linefx
= Speaker Compensation Module
Pickup
Sim
Wah Comp
Amp/
Cabinet
EQ
Noise
Gate
Mod/
Chorus
Delay Reverb
+
+
+
+
XLR Left Output
XLR Right Output
1/4" Left Output
1/4" Right Output
+
SC
SC
Mic Input
Guitar Input
Line Left
Line Right
micrvb micdry
linrvb
lindry
DRUMS
SC
micfx
linefx
= Speaker Compensation Module
Pickup
Sim
Wah Comp
Amp/
Cabinet
EQ
Noise
Gate
Mod/
Chorus
Delay Reverb
+
+
+
+
XLR Left Output
XLR Right Output
1/4" Left Output
1/4" Right Output
+
24
RPx400 Setups
ПРИМЕЧАНИЕ: Включенный Speaker Compensation может вызвать искажение микрофонного и
линейного сигналов, в зависимости от выбранного режима выхода.
SPLIT1 – Стереосигнал гитарной обработки поступает на 1/4” выходы без Speaker
Compensation. Аккомпанемент с компьютера, микрофон и линейные источники
поступают на XLR-выходы.
The SPLIT1 and SPLIT2 Output Modes are designed for when you want to keep the guitar processing
isolated from mic, line, drums, and audio playback during live performance. The SPLIT1 Output mode
routes guitar signal to the 1/4” outputs while the mic, line input sources, drums, and audio playback from
the computer are routed out the XLR outputs.
SPLIT2 is the same as SPLIT1 but the guitar signal with
Speaker Compensation is also routed out the XLR outputs.
SPLIT1 - Stereo guitar processing is routed to the 1/4” outputs without Speaker Compensation. Audio
playback from the computer, mic, and line sources are routed to the XLR outputs.
SPLIT2 - Stereo guitar processing is routed to the 1/4” outputs without Speaker Compensation. Stereo
guitar processing, audio playback from the computer, mic, and line sources are routed to the
XLR outputs with Speaker Compensation.
NOTE: Speaker Compensation may affect Mic and Line signals depending on which Output
Mode is selected.
Mic Input
Guitar Input
Line Left
Line Right
micrvb micdry
linrvb
lindry
DRUMS
SC
micfx
linefx
= Speaker Compensation Module
Pickup
Sim
Wah Comp
Amp/
Cabinet
EQ
Noise
Gate
Mod/
Chorus
Delay Reverb
+
+
+
+
XLR Left Output
XLR Right Output
1/4" Left Output
1/4" Right Output
+
SC
SC
Mic Input
Guitar Input
Line Left
Line Right
micrvb micdry
linrvb
lindry
DRUMS
SC
micfx
linefx
= Speaker Compensation Module
Pickup
Sim
Wah Comp
Amp/
Cabinet
EQ
Noise
Gate
Mod/
Chorus
Delay Reverb
+
+
+
+
XLR Left Output
XLR Right Output
1/4" Left Output
1/4" Right Output
+
24
RPx400 Setups