User Guide

16
Frequency .....................Allows you to select the center frequency of
each band (refer to the diagram above).
Ranges for frequencies 1 & 2 are .02 to 16.0
(20 Hz to 16 kHz). The Range for frequency 3
is 0.13 to 16.0 (130 Hz to 16 kHz).
Gain...............................Allows you to boost and cut the frequency.
Ranges are from -15 to 15.
The RP-6’s programmable Speaker Cabinet circuitry allows you to use
it in both recording and live situations without lugging heavy amps
and/or cabinets around. Just connect the RP-6 outputs to a mixing
console and kick in the Speaker Cabinet. No miking hassles, no heavy
equipment, just full on miked cabinet sound. Programs can be stored
with different Speaker Cabinet settings so you can customize your
Banks for whatever sound types you need. Parameters are as follows:
On / Off
..........................Turns the Module on or off.
Cabinet Type.................Selects the tonal characteristics of the simulat-
ed cabinet. There are 10 different cabinet
types; 1-3 are warm cabinets, 4-6 are medium
cabinets, 7-9 are bright cabinets, and 10 is a
full bandwidth cabinet for maximum frequency
response.
Speaker Cab
Parameters
Displayed Values
On/Off OFF-ON
Type 1...10

Section 3 -Effects and Parameters
RP-6 Owner’s Manual