Software Installation Guide Installs Cubase® LE 4, X-Edit, and USB Drivers
Table of Contents 1. Congratulations.................................................................................................................. 1 2. Computer Minimum Requirements.............................................................................. 1 3. Software Installation for Windows® Vista and XP Users......................................... 1 A. Installing Software for Windows................................................................................1 B.
1. Congratulations Congratulations on your purchase of the RP350™. This guide contains the instructions on installing and setting up Steinberg Cubase® LE 4 recording software, X-Edit™ Editor/ Librarian, and the required USB drivers for Windows® Vista, Windows XP or Mac® OSX computer systems. Please follow these instructions carefully to ensure smooth installation of each of these components. 2. Computer minimum requirements Windows® Vista, XP Home, or XP Professional • Pentium 4/Athlon 1.
. Click the “RP350 Drivers” button and follow the onscreen instructions to install the necessary drivers for using X-Edit and Cubase. 5. Click the “X-Edit” button and follow the onscreen instructions to install the X-Edit Editor/Librarian software. During the X-Edit installation, you may be prompted to install Microsoft .NET 2.0 which is required to use the X-Edit application. Agree to the terms and follow the onscreen instructions to install .NET 2.0. Once the .
C. CUBASE® LE 4 DEVICE SETUP FOR WINDOWS® 1. After the RP350TM is connected to your computer and powered on, open Cubase LE 4, and go to Devices>Device Setup as shown below. 2. Under Devices, click on VST Audio System and select RP350 ASIO from the ASIO Driver pull-down menu if it is not already selected. 3. Click on Switch to switch the driver and click OK. You are now ready to begin recording using your RP350 and Cubase LE 4.
4. SOFTWARE INSTALLATION FOR MAC® USERS The RP350TM hardware is designed to interface directly with your Mac® computer via USB using OS X’s Core Audio drivers. This means no separate driver installation is needed as long as your Mac system software is 10.4 or greater. A. INSTALLING SOFTWARE FOR MAC 1. Close any open programs you have running on your computer and place the RP350 Software DVD in your DVD-ROM drive. 2. When the RP350 Software window appears, double-click the Open Me icon.
2. Click VST Audio System and select DigiTech RP350 In/Out (2) as the ASIO Driver (as shown below). DO NOT select DigiTech RP350 In/Out (1). 3. Cubase® LE 4 will now ask you if you would like to switch the driver. Select Switch then OK. Mac OS 10.4.x users only: After selecting RP350 In/Out (2) in the Device Setup panel, you may need to verify that your device inputs are active. To do this, follow these steps: 1. 2. 3. Select Device>VST Connections from the menu bar.
5. RECORDING WITH CUBASE® LE 4 (WINDOWS® AND MAC®) A. Creating a new project 1. Open Cubase® LE 4. 2. Click File and select New Project. 3. Select default and click OK.
4. Select a location to store the project (or use the default location) and click OK. You may want to create a new folder for each new project. 5. (XP users only) When you launch Cubase LE 4 and open either a new or existing project (or if you see the warning message shown below), you must reset the driver in the Device Setup dialog. To reset the driver, click Devices > Device Setup, and click the Reset button. B. Setting the input of the track to record 1.
2. Make sure the Show Inspector button screen is lit. , located in the upper left corner of the 3. In the Audio 01 window, make sure the Record Enable button is lit.
4. In the Audio 01 window, make sure the Input Monitoring button is not lit. C. To start recording 1. Click the Record button on Cubase® LE 4’s Transport control. Record Button 2. Play your guitar. 3. When you are finished recording press the Stop button. Stop Button 4. Press Rewind and press the Play button to listen to the track you have just recorded.
8760 South Sandy Parkway Sandy, UT 84070 Tel: (801) 566-8800 Fax: (801) 566-7005 http://www.digitech.com Cubase and ASIO are trademarks of Steinberg Media Technologies GmBH. Cubase LE 4 uses the Nullsoft Scriptable Install System (NSIS) - Copyright ©1999-2007 Nullsoft, Inc.
