User Guide

40
and press either Footswitch.
3. When the Display prompts you with , rock the Expression Pedal back (toe up) and
press either Footswitch.
4. The Display now prompts you to calibrate the V-Switch sensitivity (), where  is the
current V-Switch threshold. Rock the Expression Pedal forward and press firmly on the toe
once to turn the V-Switch on (), and again to turn the V-Switch off ().
5. If the V-Switch is too sensitive, press the right Up Footswitch to raise the threshold (range is
-). Keep testing the V-Switch sensitivity and adjust the threshold until it only engages when
you want it to (too sensitive a setting will lead to the V-Switch falsely triggering on or off when
using the Expression Pedal).
6. When the V-Switch sensitivity is set to your satisfaction, press both Up/Down Footswitches
simultaneously to exit.
Note: If the Display shows , an error has occurred and steps 2 through 5 should
be repeated.