User Guide

30
VibroPan ()
A vibrato is an effect that modulates the pitch of the incoming signal. This will take the whole signal
slightly in and out of tune at a steady pace. The VibroPan also incorporates an automatic panner
with the vibrato effect that creates a lush chorus-like sound.
Speed - Knob 2 adjusts how fast the signal is being modulated.
Depth - Knob 3 adjusts the amount of pitch change.
Vibrato/Pan- Knob 4 adjusts the amount of panning incorporated with the vibrato effect.
When the “Level” control is at “0”, this effect is a standard vibrato. As the Level parameter
is turned up, the phase difference of the vibrato signal sent to the two channels is changed
until a full stereo image is obtained at “99”.
Waveform (X-Edit
TM
only) - Selects a waveform: , , or .
Vibrato ()
A Vibrato effect modulates the pitch of the incoming signal at an even rate.
Speed - Knob 2 adjusts the rate (Speed) at which the pitch modulates. Ranges from  to
.
Depth - Knob 3 adjusts the intensity (Depth) of the modulating pitch. Ranges from  to
.
Rotary Speaker ()
Rotary Speaker is an emulation of a device that included a spinning horn and woofer. The rotation
of these two speakers produced an interesting combination of the sound panning from side to
side. This produced a slight pitch change due to the speed of the sound coming towards, and then
going away from the listener.