User Guide

26
EQ
Equalization is an extremely useful tool used to further shape the tonal response of your guitar
signal. The EQ in the RP250 is similar to the tone knobs on an amplifier. All EQ parameters range
from –12 dB to +12 dB.
EQ Model - Knob 1 selects between 4 different EQ modes, each with different frequency
centers for Mid and Treble. Pressing this knob turns the EQ on and off.
Bass - Knob 2 adjusts the amount of low end level (Bass).
Mid - Knob 3 adjusts the amount of midrange level.
Mid Freq (X-Edit
TM
only) - This parameter selects the frequency that the Mid parameter
adjusts. Ranges from 300 Hz to 5000 Hz.
Treb - Knob 4 adjusts the amount of high end level (Treble).
Treb Freq (X-Edit only) - This parameter selects the frequency that the Treb parameter
adjusts. Ranges from 500 Hz to 8000 Hz.
Noise Gate
A Noise Gate is designed to eliminate noise while you are not playing, or provide an auto volume
swell effect.
Gate Model - Knob 1 selects between the DigiTech
®
noise gate or the volume swell effect.
Values include:  (Selects the noise gate) and  (Selects the volume swell effect.)
Press this knob to turn the noise gate on and off.
Threshold/Swell Sensitivity - Knob 2 sets the signal strength (Threshold) required to
open or close the Noise Gate, or the Swell Sensitivity for the Auto Swell. Both parameters
range from  (opens easily/high sensitivity) to  (requiring strong signals to open/high sen-