User Guide
34
FACTORY RESET
Allows you to erase all User Program and Utility settings at once and restore the Studio Quad 4 memory to its fac-
tory condition.
To factory reset the Studio Quad 4, please perform the folloing procedure:
1. Press the <Utility> button and scroll to Page 8 of the Utility Menu using the <Next Page> and <Prev
Page> buttons. The display reads:
2. To initiate the reset, press the <4> button.
3. If you are sure that you wish to reset, press the <3> button. If not, you can abort the procedure by pressing
the <4> button. If you press the <3> button, the Information line of the display briefly reads:
FACTORY RESETTING...
after which the unit resets, and returns to Program 1.
In extreme situations, the Studio Quad 4 can be reset using a special power-up procedure. This will also completely
reset the Studio Quad 4, eliminating any custom settings created by the user. The procedure is as follows:
1. Press and hold the <1> parameter button while powering-up to the Studio Quad 4.
2. Release the <1> parameter button after an asterisk appears in the information line on the screen.
3. Press the <Program> button, and the Studio Quad 4 will re-initialize itself.
USER PRG
SecSecmSec
Factory Reset - press[4]
IN 4
IN 3
IN 2
IN 1
FACTORY PRG
- CHANGED
- CHANGED
MIDI
LEVEL 4
LEVEL 3
LEVEL 2
LEVEL 1
OUT 4
OUT 3
OUT 2
OUT 1
CLIP
FX EDIT PAGE
12 5678910
888
CHANGED CHANGED
UTILITY PAGE
DIGITAL CLIP
2 888 Yes
MODIFIERS
1 234
CLIP
CLIP
CLIP
C
C
C
C
C
C
C
C
S-DISC
™
PROCESSING
11
%kHz
m Sec
%kHz %kHz
m
%kHz
m
34
WARNING:This procedure will destroy and reset ALL User Programs in the Studio Quad 4's
memory. Be sure you want to erase the memory, and start fresh before continuing with this procedure.
Section 4 - In Levels and Utilities
Quad 4 User's Manual