Owner's Manual

2
USER INTERFACE
1
2 3
7
6
4 5
1. Power Connector
Connect the provided power adapter to this jack. Do not use any power adapter other than the one
supplied.
2. Level Knob
Adjusts the level of the effect signal.
3. Tone Knob
As this knob is raised, the tone becomes brighter and more enhanced.
4. Output Jack
Connect this jack to the input of an amp, input of the next pedal on your pedalboard, or the effects
return of an amp effects loop.
5. Input Jack
Connect your instrument to this jack.
6. Effect LED
Shows the on/off status of the effect. This LED lights to indicate the effect is on. When the effect is
bypassed, this LED will be off.
7. Effect Footswitch
Turns the effect on and off.