Owner`s manual

• Press the [UTILITY] key once. The display reads:
• Press Function key [2] once. The display reads:
• Press Function key [3]. The display reads:
• Press Function key [2]. The display reads:
• Select whether you want to set the MIN/MAX for the internal or external
Expression pedal by pressing the appropriate Function key. The display reads:
followed by the current pedal value and current minimum and maximum set-
tings for the pedal you selected. Note that as you move the pedal, the CUR
PEDAL VALUE changes to correspond.
• To change minimum or maximum values, press the Function key that corre-
sponds with the value you want to change (Function key [1] for minimum,
Function key [2] for maximum). Note that a cursor appears under the value.
• Using the Data wheel, change the value as desired. Note that MIN cannot be
set higher than MAX. When you’re finished, press the [UTILITY] key to exit.
MIN/MAX - EXT PEDAL
Cur Pedal Value:
¡Set Min Value: 0
™Set Max Value: 127
Set Pedal’s Min/Max
¡Int Exp Pedal
™Ext Exp Pedal
¡Exp Pedal Calibrate
™Exp Pedal Min/Max
£Exp Pedal CC Assign
and CC Xmit Setup
¡Patch Assignment
™LED Assignment
£Exp Pedals and
CC Xmit Setup
¡Output Mode: Stereo
™Foot Controller
79
Section 6 - The GSP-2101 and the Control One
GSP-2101 Artist Owner’s Manual
2101 & C1