Owner`s manual
• Press the [UTILITY] key once. The display reads:
• Press Function key [2] once. The display reads:
• Press Function key [3]. The display reads:
• Press Function key [3]. The display reads:
• Press Function key [3]. The display reads:
• To change the CC transmit channel numbers, press the appropriate Function
key to select whether you want to change the setting for the internal
Expression pedal, external Expression pedal, or the Footswitch Toggle CCs.
Use the Data wheel to change the value as desired.
• When you’re finished, press the [UTILITY] key to exit this mode.
For the external units to respond to CC messages from the GSP-2101 Artist, set them
up to respond to the same CC MIDI channel that you set in the preceding steps.
Set MIDI CC Value Min and Max
- The 2101 allows you to set the minimum and maxi-
mum MIDI CC values for the internal (built-in) and external Expression pedals. This
allows you to limit the range of control to fit your application. Procedures for setting
minimum and maximum values are the same for both internal and external Expression
pedals. They are as follows:
CC Transmit Channels
¡Int Exp Pedal: 1
™Ext Exp Pedal: 1
£Toggle CC : 1
¡Int Exp CC:Not Used
™Ext Exp CC:Not Used
£CC Transmit Channel
¡Exp Pedal Calibrate
™Exp Pedal Min/Max
£Exp Pedal CC Assign
and CC Xmit Setup
¡Patch Assignment
™LED Assignment
£Exp Pedals and
CC Xmit Setup ≥
¡Output Mode: Stereo
™Foot Controller
≥
78
Section 6 - The GSP-2101 and the Control One
GSP-2101 Artist Owner’s Manual
2101 & C1