Owner`s manual

• Press Function key [2] once. The display reads:
• Press Function key [3]. The display reads:
• Press Function key [1]. The display reads:
• Select whether you want to calibrate the internal (built-in) CC pedal or an externally
connected pedal by pressing the appropriate Function key. The display will look some-
thing like this:
This step sets the maximum value of the CC pedal when it is in the fully forward position.
• Move the pedal to its full forward (toe down) position and press Function key [1]. The
display reads:
• Move the pedal to its full back (toe up) position and press Function key [2]. When the
display returns to the Utility setup menu, you have successfully calibrated the CC
pedal.
• Press the [UTILITY] key to exit the Calibration mode.
Calib Int Exp Pedal
Move Pedal Fully
Up (Back) & Press #2
Calib Int Exp Pedal
Move Pedal Fully
Down (Forward) and
¡ Press #1
¡Calib Int Exp Pedal
™Calib Ext Exp Pedal
¡Exp Pedal Calibrate
™Exp Pedal Min/Max
£Exp Pedal CC Assign
and CC Xmit Setup
¡Patch Assignment
™LED Assignment
£Exp Pedals and
CC Xmit Setup ≥
71
Section 6 - The GSP-2101 and the Control One
GSP-2101 Artist Owner’s Manual
2101 & C1