Owner`s manual

• Use the [NEXT] and [PREV] keys to select the Module you want to Move.
• Press Function key [1] to "pick up" the Module. Note that the MOVE on the display is
replaced by DROP and that the Module name disappears from the menu.
• Use the [NEXT] and [PREV] keys to select the location where you want the Module.
• Press Function key [1] to drop the Module into place in front of the selected Module.
While MOVE simply changes the screen order of the Modules within an individual S-DISC and
is available in any GSP-2101 Artist, the SWITCH option switches the Module from S-DISC 1
to S-DISC 2 or vice versa (available only in PPC-210-equipped units). To perform a Switch, do
the following:
• After entering Edit mode, the display should read:
• Press Function key [1] to show the contents of the Algorithm. The display looks some-
thing like this:
Note that a cursor appears under the first Module.
• Use the [NEXT] and [PREV] keys to select the Module you want to Switch.
• Press Function key [2] to Switch the Module to the other S-DISC. Note that when
you Switch a Module from S-DISC 1 to S-DISC 2, the Module appears at the begin-
ning of the S-DISC 2 list. When you Switch from S-DISC 2 to S-DISC 1, however,
the Module is placed at the end of the S-DISC 1 list.
NOTE: When you Switch a linked Module, the GSP-2101 Artist retains all audio routings (if
possible), regardless of the position of the Module on the screen.
î4PCho 2x1
ˆ6x2 4TDly2 5x2 Pch
Move Switch Exit
Select effect to ADD
And Then Press Enter
Link When Done
¡Show Alg £Exit
54
Section 4 - Algorithm Usage
GSP-2101 Artist Owner’s Manual
Algorithm Use