Owner`s manual

• To delete the selected Module from the Algorithm, press [ENTER]. The display
briefly reads:
after which the display reads:
• To delete another Module, repeat this process.
Deleting All FX Modules: It is also possible to delete all the existing Modules from the
Algorithm without deleting the entire Algorithm. This procedure is called “clearing the work-
space”, and it allows you to start from scratch with clean and empty RAM and CPU memory.
•After entering Edit mode, press and hold [DELETE] until the display reads:
• Release the [DELETE] key. The display reads:
At this point, you’ve successfully cleared out all the Modules in the Algorithm, leaving
you free to begin building a new Algorithm.
To delete an entire user Algorithm from memory:
WARNING! This procedure deletes the selected Algorithm permanently from memory, and
all Programs that use the Algorithm will be lost.
This procedure only works for user Algorithms. Factory Algorithms are permanent and cannot
be deleted from memory.
• From Program’s Title screen, scroll to the Algorithm screen. The display shows the
Algorithm number, the Algorithm type, the Algorithm name, and the Modules in the
Algorithm.
Select effect to ADD
And Then Press Enter
Link When Done
¡Show Alg £Exit
*** Deleting all ***
*** EFFECTS ***
Clearing Workspace
Select effect to DEL
And Then Press Enter
Link When Done
¡Show Alg £Exit
** Module Deleted **
** Successfully **
52
Section 4 - Algorithm Usage
GSP-2101 Artist Owner’s Manual
Algorithm Use