Owner`s manual

To add effects Modules to an Algorithm, you must first enter Edit mode. Edit mode is reached by
scrolling to the Algorithm screen (one screen to the right of the Title Screen) and pressing the
[ENTER] or [ADD] button.
IMPORTANT: Do not confuse Edit mode with the mode in which Parameter values are modi
fied. The term “Edit mode” is used only when referring to Algorithm editing.
Changing Parameter values is called “Program modification”.
To add effects Modules to an Algorithm, start from the title screen and do the following:
• Switch to Edit mode by scrolling to the Algorithm screen (one screen to the right of
the title screen) and pressing the [ENTER] button once. The Edit LED lights and the
display reads:
followed by:
This screen asks you to choose whether you want to modify the Algorithm of the cur-
rently selected Program, to create a completely new user Algorithm, or exit Edit
mode.
• Select the option you want by pressing the Function key that corresponds with the
number of the appropriate option in the display. The display reads:
• Using the FX Library keys or the Parameter [NEXT] / [PREV] keys, select the effect
Module you want to add to the Algorithm.
• To add the Module to the Algorithm, press [ENTER]. The display briefly reads:
after which the display returns to:
Select effect to ADD
And Then Press Enter
Link When Done
¡Show Alg £Exit
** Module Added **
*** Successfully ***
Select effect to ADD
And Then Press Enter
Link When Done
¡Show Alg £Exit
Edit Algorithm:
¡Modify Current Alg
™Create New Alg
£Exit Edit Mode
Entering edit
mode, Please wait
/
50
Section 4 - Algorithm Usage
GSP-2101 Artist Owner’s Manual
Algorithm Use