Owner`s manual
Detuners
Effect On / Off
: Turns the Module on or off. When the Module is turned off, its
Parameters are not displayed and signal will not continue to pass through the module.
To see the Parameters, you must turn the Module on.
Detuner Level
Controls the overall level of the detuner Module. Varies from 0 to 100.
Detune (Cents)
: Controls the amount of detuning applied to the effected sound.
Variable, in cents, from -100 to +100.
Voice # Predelay
: Sets the amount of time before the indicated voice is heard. Ranges,
in milliseconds, from 0 to 100.
Voice # Detune
: Appears only in multi-voice detuner Modules. Controls the amount of
detuning for the indicated voice. Variable, in cents, from -100 to +100.
Voice # Delay Time
: Sets the amount of delay time before the indicated voice is heard.
Variable, in milliseconds, from 0 to 100.
Arpeggiators
Effect On / Off
: Turns the Module on or off. When the Module is turned off, its
Parameters are not displayed, and signal will not continue to pass through the module.
To see the Parameters, you must turn the Module on.
Arpeggiator Level
: Controls the overall level of the arpeggiator. Variable from 0 to 100.
Pitch Shift (Tones)
: Sets the interval between the original note and the shifted note.
Variable in semitone steps from -24 to +24 (4 octaves).
Detune (Cents)
: Determines the amount of detuning applied to the shifted note.
Variable, in cents, from -100 to +100.
Tracking (Tones)
: Controls the sound quality/tracking speed of the pitch shifted materi-
al. This control should be set according to the amount of pitch shifting being performed.
That is, as the pitch shift interval increases, TRACKING should also be increased to
optimize sound quality. Each value setting of this Parameter is optimized for specific
ranges of pitch shifting. For instance, if the value displayed reads 6-10, it means that the
setting of PITCH SHIFT should be 6 to 10 steps from the original note for best sound
quality. Varies from, 0-1 to 12-24.
Delay Time
: Controls the amount of time before the shifted note is heard. Ranges in
seconds from 0 to 1.500.
Delay Feedback
: Sets the amount of pitch shifted material that is fed back into the
input of the arpeggiator. High settings of DELAY FEEDBACK produce interesting
unnatural sounds. Ranges from 0% to 99%, plus OFF.
34
Section 3 - Editing Effects
GSP-2101 Artist Owner’s Manual
Editing Effects