Owner`s manual
Suppose you’re using a stereo chorus and that you want to assign Function key [1] to the chorus
speed Parameter. The procedure is as follows:
• Using the Parameter [NEXT] / [PREV] keys, scroll to CHORUS SPEED.
• Press and hold Function key [1] for about two seconds. After a short pause, The dis-
play reads:
• Select the Program screen location where you want the Parameter to appear by press-
ing Function key [1], [2], or [3].
After you’ve selected a location in the Program screen for the Parameter, the GSP-2101 Artist
returns to the place in the Parameter menu where you left off.
If you decide you want to change the Function key assignment for that Parameter, repeat the
process, and select a different location. If you want to leave a Parameter with no Function key
assignment, press its assigned Function key again, and the Function key will be disconnected
from the Parameter. After you've made your Function key assignments, you’ll need to store the
Program in order to retain the changes. See pg. 17 for information on Storing Programs.
The special characters used to indicate Function key assignments are as follows:
¡ Indicates that Access key [1] has been assigned to the Parameter shown in the display.
™ Indicates that Access key [2] has been assigned to the Parameter shown in the display.
£ Indicates that Access key [3] has been assigned to the Parameter shown in the display.
COMPARING PROGRAMS
The [COMPARE] button lets you compare a modified Program to the original program without
losing the modifications you have made. This feature makes the difference between Programs
clear, and provides an easy reference point for creating new Programs.
To compare a modified Program to the original:
• Press the [COMPARE] button. The GSP-2101 Artist will temporarily switch to the
original Program settings, and the display will read:
Now you can hear what the original Program sounds like. Press the [COMPARE] but-
ton again to switch back to the edited version.
The GSP-2101 Artist will not respond to any buttons or commands while in Compare mode.
*** ***
*** COMPARING ***
*** ***
Select parameter's
location on program
screen
¨ ¨ ¨
15
Section 3 - Editing Effects
GSP-2101 Artist Owner’s Manual
Editing Effects