Owner`s manual
Preset Bounceback
If you would rather not bypass individual presets in Preset Mode by pressing their footswitches
repeatedly, you can enable the Preset Bounceback function in the Utility menu. For example, let’s say
you select Preset 1 using FOOTSWITCH 1 as your rhythm tone. Then you select Preset 4 using
FOOTSWITCH 4 as your solo tone. You can now press FOOTSWITCH 4 again and Preset 1
will be selected again. Pressing FOOTSWITCH 4 repeatedly will bounceback between Preset 4 and
Preset 1. To enable the Preset Bounceback feature,do the following:
1. Press the UTILITY control panel button and use the PREV/NEXT arrow buttons to locate the
Bounceback feature. The display will read BOUNCBAK.
2. Rotate the DATA WHEEL to turn the BounceBack feature on.
3. When finished press the EXIT button.
NOTE:The Preset Bounceback feature only works when the GNX4 is in Preset Mode.
For more information regarding the footswitch functions for Preset Mode see page 59.
Stompbox/Control Mode
Stompbox/Control Mode is another mode of operation that can be used during a performance. When
Stompbox/Control Mode is active, the UP/DOWN footswitches are used to select the GNX4’s presets.
Footswitches 1-4 turn the effects on and off. Footswitch 5 is used as a Tap-Tempo switch for setting the
delay time during a live performance.
For more information regarding the footswitch functions for Stompbox/Control Mode see page 60.
Recorder Mode
When Recorder Mode is active,the GNX4’s UP/DOWN footswitches are used for selecting songs
and loops that reside in the recorder’s memory. The 1-5 footswitches are used for hands-free control of
the recorder’s functions.
For more information regarding the footswitch functions for Recorder Mode see page 61.
Expression Pedal
The Expression Pedal can control three different parameters simultaneously in each preset. Rock the
Expression Pedal back and forth to change the values of the assigned parameters. Each parameter the
Expression Pedal controls has an adjustable minimum and maximum range. The Expression Pedal also
includes a feature called V-Switch and when enabled,it turns on the wah effect and switches from controlling
the parameters assigned to the Expression Pedal and controls the Wah. See page 45 for more information on
Expression Pedal Pedal Assignment.
22
About the GNX4