Owner`s manual

Mic and Line Setups
The Mic and Line Setups are configurations for the mic and line inputs designed for both live performance
and recording applications. The GNX4 acts as a mixing device for mic and line sources, and can eliminate
the need for a mixer when the GNX4s outputs are to be plugged directly into a full-range powered
speaker system. When enabled, these inputs can be routed around or through the GNX4s effects
processing and then mixed directly into the GNX4s 1/4 and XLR outputs.
Use the SHIFT>MIC and SHIFT>LINE buttons along with the DATA WHEEL to select the Mic/Line
Setup options.
Both Mic and Line inputs have four settings that can be independently selected. They are as follows:
MIC OFF / LINe OFF - Mic and Line inputs are disabled.
MIC DRY / LINe DRY - Inputs routed directly to GNX4s outputs, bypassing all effects processing.
MIC RVB / LINe RVB - Inputs routed through delay and reverb effects of the current preset.
MIC FX / LINE FX - Inputs routed through all effects of current preset.
Mic Routing
Line Input Routing
Line Left
Line Right
line fx
line rvb
line dry
+
l
i
n
e
off
SC
SC
SC
SC
SC
SC
SC
Delay Reverb
+
+
+
+
XLR Left Output
XLR Right Output
1/4" Left Output
1/4" Right Output
Pickup
Sim
Wah Comp
Stompbox
CH 1
Cabinet
Whammy/IPS
(except
Ta l k e r )
CH 1 Amp
Modeling/
To n e
CH 1
Cabinet
CH 1 Amp
Modeling/
To n e
CH 2
Cabinet
CH 2 Amp
Modeling/
To n e
Gate
Whammy/IPS
(Talker)
Chorus/
Mod
+
+
m
ic
off
mic rvb mic dry
Mic Input
Pickup
Sim
Wah Comp
Stompbox
CH 1
Cabinet
Delay Reverb
+
+
+
+
XLR Left Output
XLR Right Output
1/4" Left Output
1/4" Right Output
Whammy/IPS
(except
Talker)
CH 1 Amp
Modeling/
Tone
CH 1
Cabinet
CH 1 Amp
Modeling/
Tone
CH 2
Cabinet
CH 2 Amp
Modeling/
Tone
Gate
Whammy/IPS
(Talker)
Chorus/
Mod
+
+
mic fx
SC
SC
SC
SC
Mic, Line
buttons
Shift button
Recorder Panel
Data Wheel
12
Audio Routing Setups