User Manual

3. Connect the coax cable (not provided) from the OUTPUT on
the amplifier to the ANTENNA input of the power inserter.
When mast mounting, use the other larger zip tie provided to
secure cable to mast.
4. When you want to wire the cable into your house, we
recommended that you should have a water-drip loop before
the cable into your house to prevent the water through the
cable to your house.
5. Connect the coax cable pre-attached to the power inserter to
the HDTV.
6. Connect the power supply plug to the power inserter.
7. Plug the power supply into an AC wall outlet. The lighted red
LED confirms that power is correctly applied.