User Manual

ManualsBrandsDigiTech ManualsEffects PedalsJamMan Solo XT - Looper Pedal with USB and microSDHC Slot

54

To format or reformat a Micro SD/SDHC card:

1. Press and hold the <STORE> button

for six seconds. The display will show

For (Format Card) and the <STORE>

button will begin ﬂashing.

2. Press the <STORE> button again. The

display will read F? (Format ?) and the

STORE button will continue to ﬂash.

If you wish to abort this procedure,

press the <PEDAL SWITCH>. If you

wish to proceed, go to step 3.

3. To initiate the card formatting

procedure, press and hold the

<STORE> button again for two

seconds. The display will show BuS,

indicating the card is being formatted.

Wait for the format procedure to

complete.