User Manual

Time Stretching a Phrase

You can speed up or slow down the tempo of a stored loop or single phrase without

changing its pitch. There are two ways to time stretch a phrase: set the exact tempo

using the Tempo option in the Setup menu, or tap in the tempo using the <TEMPO>

button.

To time stretch a phrase:

1. Select the desired memory location

using the <UP/DOWN> buttons.

2. Initiate playback by pressing the

<PEDAL SWITCH>.

3. Tap in a new tempo using the

<TEMPO> button or press the

<SETUP> button twice until tPo is

shown in the display.

4. If you pressed the <SETUP> button

twice in the last step, press the <UP>

button to increase tempo or the

<DOWN> button to decrease tempo.

When done, press the <PEDAL

SWITCH>

to exit the Setup menu.

5. If you decide you want to revert back

to the original tempo, press and hold

the <TEMPO> button until the LOOP

LED ﬂashes and the tempo returns to

normal.

6. *If you’ve decided to store the tempo

change, press the <STORE> button

twice or copy the loop to an empty

memory location (see “Operation >

Copying a Loop

”).

*WARNING! Changing the tempo of a phrase then overwriting it in memory cannot be undone!