User Manual

ELECTROMAGNETIC COMPATIBILITY
This device complies with part 15 of the FCC Rules and
the Product Specifications noted on the Declaration
of Conformity. Operation is subject to the following
two conditions:
• this device may not cause harmful
interference, and
• this device must accept any interference received,
including interference that may cause undesired
operation.
Operation of this unit within significant
electromagnetic fields should be avoided.
• use only shielded interconnecting cables.
U.K. MAINS PLUG WARNING
A molded mains plug that has been cut off from the
cord is unsafe. Discard the mains plug at a suitable
disposal facility.
NEVER UNDER ANY CIRCUMSTANCES
SHOULD YOU INSERT A DAMAGED OR
CUT MAINS PLUG INTO A 13 AMP POWER
SOCKET.
Do not use the mains plug without the fuse cover in
place. Replacement fuse covers can be obtained from
your local retailer. Replacement fuses are 13 amps and
MUST be ASTA approved to BS1362.
EXTREME (RF) RADIO FREQUENCY ENVIRONMENTS
The JamMan Solo XT may experience audio dropout if exposed to an Extreme RF Environment. Such RF
Environments may be found in very close proximity to strong radio transmitters. If the audio is lost due to
such RF Environments, it is advised that you place the ferrite choke onto the power adapter cable per the
diagram below. The ferrite core (P/N 5027963) can be found within the power adapter box.
Ferrite Core
1
2