User Manual

5
4. LED DISPLAY
This display shows the currently
selected loop memory location and
JamSync slave status. It also shows
information during operational
procedures and Setup menu
navigation, such as displaying and
editing tempo.
5. UP/DOWN BUTTONS
The up and down buttons are used
for selecting loop memory locations
and selecting options when navigating
the Setup menu. These buttons can
also be used to cue up the next
loop for seamless on-the-fly loop
transitions.
6. LOOP LED
This green LED indicates the
currently selected memory location
is set to playback continuously when
play is initiated. Loop is the default
setting for recorded phrases. A Loop
can be converted to a Single Phrase
and vice versa. When this LED is
flashing, the internal or external
memory is busy and the memory
card should not be removed.
7. SINGLE LED
This yellow LED indicates the current
memory location is set to playback
as a Single Phrase, playing the
entire phrase only once when play
is initiated. A Single Phrase can be
converted to a Loop and vice versa.
8. CARD MEM LED
This red LED lights when selecting
loop memories on an optional Micro
SD/SDHC memory card. When this
LED is off, loops are being selected
from the JamMan Solo XT’s internal
memory.
9. RHYTHM LEVEL CONTROL
This knob controls the output level
of the Rhythm Guide Track.