User Manual

ManualsBrandsDigiTech ManualsEffects PedalsJamMan Solo XT - Looper Pedal with USB and microSDHC Slot

1

2

3

4

5

6

7

8

9

4

User Interface & Connectors

JAMSYNC

20

3 94

1

5 6 87

2

1. PEDAL SWITCH

The Pedal Switch is used to start

recording and toggle between

playback and overdubbing. The Pedal

Switch can also be used for tapping

in tempo for a new loop, as well as

undoing and redoing the last overdub.

Pressing the Pedal Switch two times

quickly stops loop playback. This

switch is also used for exiting the

Setup menu and aborting the store

function.

2. STATUS LED

This LED indicates status during

record, playback, and overdub, as

described below.

Solid Red–Record

Flashing Red–Armed for record using Auto

Record

Solid Green–Play

Solid Yellow–Overdub

Flashing Red/Green–Tempo Record Count In

Slave Flashing Red–Armed for record

Slave Flashing Green–Armed for play

3. LOOP LEVEL CONTROL

This knob controls the output level

of the loop.