User Manual

52
Erase All Loops - Internal Memory
The JamMan
®
Stereo uses both internal memory and optional card memory
for the storage of loop files. You can erase all loops from internal memory
or from card memory without having to delete them one at a time.
To erase all loops from internal memory, follow these steps:
1. Select a loop memory location that does not light the CARD MEM LED.
2. Enable the SHIFT button.
3. Press and hold the DELETE button for four seconds until Ei (Erase
Internal Memory Loops) appears in the Display and release (EL will
show briefly first but keep holding the button until Ei appears). The
DELETE
button will begin flashing.
4. Press the DELETE button again. The DISPLAY reads E? (Erase Loops?).
The DELETE button will continue to flash. To abort this procedure,
press the EXIT button.
5. To erase all internal loop memories, press and hold the DELETE
button for two more seconds. The DISPLAY will show Bu indicating
the internal memory is being erased. When the delete procedure is
complete the display will return to the memory number and the EXIT
and DELETE buttons will turn off.