User Guide

Guided Tour

Front Panel

1.Amp Model - This knob is used to select the Amp Model for the active green or red amp channel (indicated by the

color of the amp parameter LEDs). One green and one red LED light indicating the selected Amp

Models for both Channels. If both Amp Channel’s have the same Amp Model selected, one yellow

LED lights.

2.Tap-It -This button is used to synchronize the Delay repeats with the tempo of the music. Tapping this button sets

the Delay time at the rate in which it is tapped. Press TAP-IT and EDIT simultaneously to access the

Assign menu. When in Utility mode, TAP-IT selects the previous menu. When in Store or Amp Save

mode, TAP-IT selects the previous character when naming presents and user HyperModels™.

3. Edit - This button is used to edit selected effects. The effect LEDs indicated the selected effect. Successive presses

of the Edit button advance through all available effects. Press EDIT and TAP-IT simultaneously to access the

Assign menu. When in Utility mode, EDIT selects the next menu. When in Store or Amp Save mode, EDIT

selects the next character when naming presents and user HyperModels™.

4. Effects LEDs - In performance mode, the effect LEDs provide a visual indication of the active effects in the the

selected preset. In Edit mode,they indicate the effect currently selected for editing.

5. Effect Parameter knobs - In Performance mode,these knobs control the most commonly adjusted effect

parameters. In Edit mode, these knobs adjust the parameters of the selected effect.

a. Speed/Amount/P1 - In Performance mode,this knob adjusts the Speed of the selected Modulation effect,

or the Amount of the selected Pitch Shift or Detune effects. In Edit mode,this knob

adjusts the first parameter of the selected effect.

b. Speed/Amount/P2 - In Performance mode,this knob adjusts the Depth of the selected Modulation effect.

In Edit mode, this knob adjusts the second parameter of the selected effect.

PICKUP - WAH PRESET VALUE DATA / PRESET

COMP - GATE

WHAMMY / IPS

CHORUS / MOD

DELAY

REVERB

EDITTAP-IT SPEED / AMOUNT DEPTH MOD LEVEL DELAY LEVEL REVERB LEVEL

P1 P2 P3 P4 P5

AMP SAVE STORE

UTILITY

ASSIGN

Introduction