User Guide

Editing the Effects
The Genesis3 contains a comprehensive library of fully programmable,studio quality Effects. The Effects section is
accessed with the EDIT button.Successive presses of the EDIT button will advance through all available effects in a
Preset.The effect LEDs will light one at a time to indicate the selected Effect.When you have selected the desired
effect,you have up to 5 Parameters which can be edited using the effect parameter knobs.Rotating the DATA knob
will turn the selected effect on or off.The 5 knobs located directly beneath the Display will adjust the Parameters
associated with the selected effect. When a knob is turned,the corresponding Parameter name will appear in the green
alpha-numeric Display and the Parameter value will be shown in the red numeric Display.
Rotating the effect parameter knobs will increase or decrease the value of the corresponding parameter and you will
hear the change in real time.When parameter values have been changed,the Store LED will light indicating the preset
has been modified and must be stored in order to retain your changes (see page 14 for more on the store procedure).
Changing Presets,or turning the power off before storing any changes will erase your changes and revert to the stored
values for the selected preset.When the preset has been edited to your liking,you may store your settings to any of
the 48 user preset locations.
PICKUP - WAH PRESET VALUE DATA / PRESET
COMP - GATE
WHAMMY / IPS
CHORUS / MOD
DELAY
REVERB
EDITTAP-IT SPEED / AMOUNT DEPTH MOD LEVEL DELAY LEVEL REVERB LEVEL
P1 P2 P3 P4 P5
AMP SAVE STORE
UTILITY ASSIGN
Editing Functions
13