Owner's Manual

USING LOOKING GLASS:
Most guitarists/bassists will favor placing the Looking Glass at the
beginning of their chain of eects, so start with that placement.
A typical eects signal chain will consist of Overdrive eects rst
then Modulation eects (Chorus, Flanger, Phaser, Tremolo, etc...)
next and then nally Time based eects (Delay and Reverb).
Placing the Looking Glass toward the front of your chain or eects
will preserve the vibe no matter the pedal combination that
follows. That being said you are always free to experiment with
dierent eect placements.
SPECIFICATIONS:
Input
Output
Current Draw
Bypass
Power
Warranty
1/4” TS Unbalanced - 260 kΩ (DIP 1 set to on)
235 kΩ (DIP 1 set to o)
1/4” TS Unbalanced - 1 kΩ
4 mA
True Bypass
9VDC alkaline battery (not included)
PS0913DC power adapter (optional)
1 Year
DOD
59 Hwagok-ro 61gil
Gangseo-gu, Seoul 07590
Republic of Korea
[e-mail]
Rev A - 2/16