User Manual

Owner's Manual
55
Delay Type Option Description
Tape Multitap 1 Tape delays with a multi-tap eighth and quarter pattern.
Tape Multitap 2 Tape delays with a multi-tap triplet pong pattern.
Tape Multitap 3 Tape delays with a multi-tap dotted eighth + quarter note pattern.
Bandpass Delay at the currently set tempo, but each time around the delay
line is ltered with a bandpass lter so the repeats get more and
more lo-.
Band Ducked 50 Bandpassed delay at currently set tempo with 50% feedback
ducking so the louder you sing, the less gets into the delay line.
Band Ducked 75 Bandpassed delay at currently set tempo with 75% feedback
ducking so the louder you sing, the less gets into the delay line.
Band Ducked 100 Bandpassed delay at currently set tempo with 100% feedback
ducking so the louder you sing, the less gets into the delay line.
Band Pong Bandpassed delays at currently set tempo ponged left to right.
Band Multitap 1 Bandpassed delays with a multi-tap eighth and quarter pattern.
Band Multitap 2 Bandpassed delays with a multi-tap triplet pong pattern.
Band Multitap 3 Bandpassed delays with a multi-tap dotted eighth + quarter note
pattern.
• AMOUNT (0-99)
This parameter adjusts the Delay effect's mix level, with 0 being the minimum
(no effect applied) and 99 being the maximum amount of effect applied.
• REPEATS (0-99)
This parameter adjusts how much of the delayed signal will be fed back into
the delay algorithm and determines how long the delays will continue to
repeat, with 0 being the minimum amount of delay repeats and 99 being the
maximum amount of delay repeats.
• SPEED
This parameter adjusts the rate at which the delays repeat. The following table
provides a description of each option.
Delay Speed Type Option Description
1 x 1 x the currently set tempo (quarter note).
2 x 2 x the currently set tempo (eighth note).
3 x 3 x the currently set tempo (triplet note).
4/3 x 4/3 x the currently set tempo (dotted eighth note).
1/2 x 1/2 x the currently set tempo (half note).
Slap 1 Slapback delay (80 ms–TEMPO parameter is ignored with
this option selected).
Slap 2 Slapback delay (100 ms–TEMPO parameter is ignored
with this option selected).
Slap 3 Slapback delay (120 ms–TEMPO parameter is ignored
with this option selected).