User Manual

Owner's Manual
51
To dial in the Double effect:
1. Sing into the microphone (or use the Sound Check feature, see "Sound Check"
on page 14) and ensure the AMOUNT parameter is set high enough to hear
the effect.
2. Using the <DATA> encoder, select the desired doubling voice TYPE.
3. If you would like to detune or uptune the doubled voice(s), adjust the DETUNE
parameter for the desired effect.
4. Adjust the HUMANIZE parameter until the desired amount of distinction and
realism is achieved.
5. If you want to apply pitch correction to the doubled voice(s), adjust the CORR
parameter until the desired effect is achieved.
6. Fine tune the AMOUNT parameter until the desired effect balance is achieved.