User Manual

Owner's Manual
25
FS3X Footswitch Control
The footswitch functions in the Live FX are reassigned when the Looper is
enabled. This prevents changing presets and A/B status when controlling the
Looper functions. An optional DigiTech FS3X Footswitch can be used for full-time
looper control, freeing up the Live FX footswitches to be used for full-time preset
navigation. This provides streamlined control and quick access to the looper
functions.
FS3X Footswitch Looper Functions:
Mode Switch
Press this footswitch to
enable recording, playblack, or
overdub recording functions.
Press and hold to perform
overdub Undo/Redo
functions.
Down Switch
Press this footswitch to stop
playback or recording. Press and hold
to clear the loop and exit Looper
mode.
Up Switch
Not used.
NOTE: When using an FS3X Footswitch with the Live FX, the EP (Expression
Pedal) TYPE parameter in the System Edit menu must be congured for FS3X
control (this is the default setting from the factory). See "EP (Expression Pedal)
Type" on page 31 for more information.