User Manual

Owner's Manual
21
2. If you do not wish to rename the preset, go to step 5. If you do wish to rename
the preset, turn the <Edit 1> knob to change the selected character. The
preset name can contain up to 16 characters.
3. Turn the <DATA> encoder clockwise to select the next character for editing.
4. Repeat steps 2 and 3 for all remaining characters until you have entered the
desired preset name.
5. Press the <Store> button again. The display will read “STORE TO:”. If you do
not want to change the preset location, go to step 6. If you do want to change
the preset location, turn the <DATA> encoder to select the desired user
preset location. This process will overwrite the preset currently residing in the
selected location.
6. Press the <Store> button again to store the preset.
To copy a preset to another preset location:
1. Select the preset you would like to copy using the <DATA> encoder or
<Up>/<Down> footswitches.
2. Press the <Store> button. The Store button will begin ashing and the rst
character of the preset’s name will now have a cursor under it.
3. Press the <Store> button again. The display will read “STORE TO:”. Turn
the <DATA> encoder to select the user preset location to copy the preset
to. This process will overwrite the preset currently residing in the selected
location.
4. Press the <Store> button again to store the preset.
HINT: Press any button or footswitch other than <Store> at any time during
the store procedure to cancel the operation.