User Manual

Front Panel

12345678

13141516

1. Numeric Display

Shows the number of the selected preset.

2. Part A/B Display

Shows which part is currently active, Part A or Part B.

3. Alphanumeric Display

Shows the name of the selected preset. While editing, it will show the param-

eter name and value being edited.

4. Stereo Button

When Stereo is the selected output mode (Stereo button is lit), the harmony

voices are panned slightly left and right, and certain effects (chorus, flanger, and

reverb, for example) operate in stereo. When Mono is the selected output

mode (Stereo button is off), the output mix is mono and the outputs all carry

the same signal.

5. Phantom Power Button

Enables 48 volt phantom power on the XLR mic input. Note: Phantom power

is normally only needed with condenser microphones and should never be

used with ribbon microphones. To avoid damaging the microphone, please

consult your microphone documentation to ensure phantom power is applied

only when appropriate.

6. Key Display

Shows the selected root key (E, F, F#, etc.) for generating harmonies when

musIQ is off. The Key display includes accidental symbols (sharp and flat) as

well as the scale modes major or minor.