User Manual
34
Specications
Mic Input
Connector: XLR portion of XLR-1/4” Combo Jack
Input Sensitivity @ -3 dBFS -35 dBu to 0 dBu
Equivalent Input Noise (EIN): -126 dBu, 20 Hz - 20 kHz (A-weighted)
Impedance: 1.2 kOhms balanced
Line Input
Connectors: ¼″ portion of XLR-1/4” Combo Jack
Input Sensitivity @ -3 dBFS: -20 dBu to +15 dBu
Input Impedance: 14.8 kOhms balanced, 9.7 kOhms unbalanced
Guitar Input and Thru
Connectors: ¼” unbalanced TS (tip/sleeve) connectors
Max Input Level Thru: 11 V peak-peak
Sensitivity @ 0 dBFS digital: 6 V peak-peak
Impedance: 1 MOhms unbalanced
Line Input to Line Output (1/4” TRS) Performance:
Output Level @ 0 dBFS: +12.5 dBu balanced, +6.5 dBu unbalanced
Dynamic Range: >106 dB, 20 Hz - 20 kHz (A-weighted)
THD + Noise @ Min gain: <0.005% @ 1 kHz
Frequency Response @ max gain: -3 dB @ 30 Hz and 21 kHz
Line Input to XLR Output Performance
Output Level @ 0 dBFS: -5 dBu balanced
Dynamic Range: >106 dB, 20 Hz - 20 kHz (A-weighted)
THD + Noise @ Min gain: <0.005% @ 1 kHz
Frequency Response @ max gain: -3 dB @ 30 Hz and 21 kHz
Stereo Headphone Output
Connector: ¼” TRS stereo (tip left/sleeve right)
unbalanced
Output Power @ 0.5% THD
and 32 Ohm Load: 170 mW RMS continuous
Dynamic Range: >106 dB (A-weighted)
Output Impedance: 18 Ohms
Expression Pedal Input Requirements
Passive TS (tip/sleeve)
volume/expression pedal: 250 kOhms or greater*
Passive TRS (tip/ring/sleeve)
expression pedal: 10 kOhms or greater *
Analog to Digital and Digital to Analog Converters
Resolution: 24 bits
Sampling Rate: 44.1 kHz
*Consult your manufacturer’s pedal specications