User Manual

27
Troubleshooting
I don’t hear any sound coming from the Vocalist
®
Live 5.
Make sure the power supply is plugged in to both the Vocalist Live 5 and the
power outlet.
Make sure the guitar amp, P.A. system, or mixer is plugged in and turned on.
Make sure the guitar amp, P.A. system, or mixer volume levels aren’t turned all
the way down.
Make sure the guitar volume isn’t turned all the way down, and the microphone
isn’t turned off (if it has an on/off switch).
Make sure the Mic/Line Input Level knob isn’t turned all the way down.
Make sure all the cables are completely plugged into their proper places (see
pages 8 through 10 for instructions and diagrams).
The harmonies aren’t tracking properly.
Make sure the Guitar Signal LED is green or amber while playing (see Setting the Guitar
Level on page 11 for more information).
Tune the guitar with the Vocalist Live 5 tuner (see page 10).
Make sure you’re not in Tuner mode while singing.
The guitar signal is too quiet.
Turn up the volume on your guitar.
Make sure the guitar cable is properly connected to the guitar and the Vocalist
Live 5.
The guitar signal is too loud.
Turn down the volume on your guitar.
Turn down the Guitar Level knob.
The lead vocal is too quiet.
Turn up the Vocal Level knob.
Turn up the Mic/Line Input Level knob.
If you’re using a P.A. system or mixer, turn up the channel that the Vocalist Live 5
is connected to, or turn up the master level (volume) controls.
Try singing closer to the microphone.
The lead vocal is too loud.
Turn down the Vocal Level knob.
Turn down the Mic/Line Input Level knob.
If you’re using a P.A. system or mixer, turn down the channel that the Vocalist
Live 5 is connected to, or turn down the master level (volume) controls.
I don’t hear any harmonies, or the harmonies are too quiet.
Make sure the Harmony footswitch is pressed so that the LED just above it is
lit.
Turn up the Harmony Level knob.
Make sure the Voicing parameter (in the Harmony row of the Effects Matrix) is
not set to OFF.
The harmonies are too loud.
Turn down the Harmony Level knob.