User Manual

Delay

The RP55 has 3 different delay types, Mono (D), Analog (A), and Ping Pong (P), each with

2 seconds of delay time available. There are two different parameters used to program

the delay, Delay Variation and Time. The first parameter of the delay effect is Delay Type/

Variation, which selects the delay type to be used and varies the amount of feedback

(number of repeats) and level. The second delay parameter is Delay Time. This is indicated

by a value 1-99 (10ms-990ms), 1.0 and 2.0 (1 and 2 seconds respectively) in the display

when the Delay LED is lit. Delay settings are as follows:

d, a, p1=5% fback, level 15

d, a, p2=25% fback, level 15

d, a, p3=50% fback, level 15

d, a, p4=5% fback, level 30

d, a, p5=25% fback, level 30

d, a, p6=50% fback, level 30

d, a, p7=5% fback, level 50

d, a, p8=25% fback, level 50

d, a, p9=50% fback, level 50

Reverb

Usingreverbinrecordedprogrammaterialgivesthelistenerasensethatthematerialis

being performed in an actual room or hall. It is this similarity to actual acoustic spaces that

makesreverberationausefultoolinrecordedmusic.UsetheValuebuttonstoselectone

of the nine predetermined settings. The higher numbers indicate there is more reverb level.

The reverb settings are as follows:

r1-f9 = Room

H1-H9 - Hall

P1-p9 - Plate

C1-C9=Church

A1-a9 = Arena

S1-s9 - Spring