User Manual

Connecting a cable to the Input applies power to the RP55. Disconnecting your instrument
from the Input of the RP55 disconnects the battery power. Turn your amplifier(s) on and
adjust the volume(s) to a normal playing level. To prolong the battery life, disconnect your
instrument from the RP55’s Input when not in use.
AC Power
The RP55 can also be powered with the optional PS200R power supply. Connect the plug
of the PS200R power supply to the power jack on the rear panel of the RP55. Connect
the other end of the PS200R power supply to an AC outlet. Turn your amplifier(s) on and
adjust the volume(s)to a normal playing level.
About the RP55
The Presets
Presets are numbered locations of programmed sounds. Presets are recalled with the
Footswitches.TheRP55comeswith40UserPresets(Presets1-40)and40FactoryPresets
(Presets41-80).TheUserPresetsarelocationswhereyoumaystorepresetsyoucreate.
TheFactoryPresetsmaynotbesavedover.Fromthefactory,the40UserPresetsare
exactduplicatesofthe40FactoryPresets.Thisletsyoumakeyourownpresetswithout
the worry of losing any Factory Presets.
Play Mode
When you first apply power to the RP55, it powers up in Play mode. The far left LED lights,
indicatingyou’reinPlaymode.InPlaymode,usetheUpandDownFootswitchestoaccess
the presets.
8