User Manual

32
RP360 / RP360 XP
Aux Input
The AUX IN connector is used to connect a portable music player or other line-level music playback
device to the RP and jam along with your favorite music The signal from your playback device will
not pass through any effects and will be output through the RP’s LEFT OUT, RIGHT OUT, and
HEADPHONE connectors�
To use the AUX IN connector:
1
Connect the headphone output of your music playback device to the AUX IN connector on
the rear panel of the RP using an 1/8” stereo cable as shown below
2 Press play on your music playback device�
3 Adjust your music playback device’s volume control and the RP’s Master Level control to
achieve the desired mix balance� See Preset Level & Master Level on page 25 for
information on adjusting the RP’s MASTER LEVEL control�
1/8” Stereo Cable
1/8” Stereo Cable
Ground
Left +
Right +
Left
Channel (+)
Right
Channel (+)
Ground
Left
Channel (+)
Right
Channel (+)
Ground