User Manual

26
RP360 / RP360 XP
Preset (Effects) Bypass
The Preset Bypass feature bypasses all effects in the currently
loaded preset and feeds only the dry (unprocessed) signal to
the outputs� While a preset is bypassed, no other functions are
available The bypassed guitar signal will be passed up USB while
bypass is active, but no audio will be heard from the computer
via USB� Bypass is accessed in different ways depending on the
selected Footswitch Mode See Footswitch Modes on page 41
for more information on Footswitch Modes�
Plexi-Drive 1
LOOPER READ Y
BYPASS
To bypass a preset’s effects (Footswitch Mode set to “PRESET” or “STOMP”):
1
Press FOOTSWITCHES 1 and 2 simultaneously to enable Preset Bypass� “BYPASS” will appear
in the LCD display
2 When done, press any footswitch to exit Preset Bypass�
To bypass a preset’s effects (Footswitch Mode set to “BANK”):
1
Press the currently active preset’s FOOTSWITCH (indicated by the lit LED above the
footswitch)� “BYPASS” will appear in the LCD display
2 When done, press any footswitch to exit Preset Bypass�