User Manual
Table Of Contents
- Introduction
- Features
- Included Items
- User Interface & Connectors
- Connection Diagrams
- Quick Start
- Operation
- Selecting a Loop in Memory
- Free-Form vs Auto Quantized Looping
- Recording a Loop (Free-Form)
- Recording a Loop Using Auto Record
- Recording a Loop (Auto Quantize)
- Recording a Loop Using Pedal Tempo (Auto Quantize)
- Recording a Loop Using the AUX IN Jack
- Multiple Loop Playback (Cueing Loops)
- Recording Overdubs
- Undo, Redo, & Clear
- Time Stretching a Phrase
- Storing a Loop
- Copying a Loop
- Deleting a Loop
- Erasing All Loops (Internal Memory)
- Erasing All Loops (External Memory Card)
- Using JamSync
- Setup
- External Micro SD/SDHC Memory Cards
- JamManager XT Librarian Software
- Optional FS3X Footswitch
- Factory Restore
- Specifications
54
To format or reformat a Micro SD/SDHC card:
1. Press and hold the <STORE> button
for six seconds. The display will show
For (Format Card) and the <STORE>
button will begin flashing.
2. Press the <STORE> button again. The
display will read F? (Format ?) and the
STORE button will continue to flash.
If you wish to abort this procedure,
press the <PEDAL SWITCH>. If you
wish to proceed, go to step 3.
3. To initiate the card formatting
procedure, press and hold the
<STORE> button again for two
seconds. The display will show BuS,
indicating the card is being formatted.
Wait for the format procedure to
complete.