User Manual
Table Of Contents
- Introduction
- Features
- Included Items
- User Interface & Connectors
- Connection Diagrams
- Quick Start
- Operation
- Selecting a Loop in Memory
- Free-Form vs Auto Quantized Looping
- Recording a Loop (Free-Form)
- Recording a Loop Using Auto Record
- Recording a Loop (Auto Quantize)
- Recording a Loop Using Pedal Tempo (Auto Quantize)
- Recording a Loop Using the AUX IN Jack
- Multiple Loop Playback (Cueing Loops)
- Recording Overdubs
- Undo, Redo, & Clear
- Time Stretching a Phrase
- Storing a Loop
- Copying a Loop
- Deleting a Loop
- Erasing All Loops (Internal Memory)
- Erasing All Loops (External Memory Card)
- Using JamSync
- Setup
- External Micro SD/SDHC Memory Cards
- JamManager XT Librarian Software
- Optional FS3X Footswitch
- Factory Restore
- Specifications
48
Reverse
The Reverse feature lets you playback a recorded loop file in reverse. Changes to the
Reverse parameter must be stored to memory if you wish to retain the changes.
To Reverse a loop:
1. Press the <SETUP> button six times
or until RSe appears in the display.
2. Press the <UP/DOWN> buttons to
turn the Reverse feature on and off.
3. Once the desired selection has been
made, press the <PEDAL SWITCH>
to exit the Setup menu.
4. Press the <STORE> button twice to
store the changes.
NOTE: The Reverse feature is non-destructive. You can always come back into the Setup menu and
turn the Reverse feature off if you wish the loop to playback normally again.