User Manual
Table Of Contents
- Introduction
- Features
- Included Items
- User Interface & Connectors
- Connection Diagrams
- Quick Start
- Operation
- Selecting a Loop in Memory
- Free-Form vs Auto Quantized Looping
- Recording a Loop (Free-Form)
- Recording a Loop Using Auto Record
- Recording a Loop (Auto Quantize)
- Recording a Loop Using Pedal Tempo (Auto Quantize)
- Recording a Loop Using the AUX IN Jack
- Multiple Loop Playback (Cueing Loops)
- Recording Overdubs
- Undo, Redo, & Clear
- Time Stretching a Phrase
- Storing a Loop
- Copying a Loop
- Deleting a Loop
- Erasing All Loops (Internal Memory)
- Erasing All Loops (External Memory Card)
- Using JamSync
- Setup
- External Micro SD/SDHC Memory Cards
- JamManager XT Librarian Software
- Optional FS3X Footswitch
- Factory Restore
- Specifications
47
Stop Modes
The JamMan Solo XT has 3 different loop Stop Modes to choose from, they are: Fade,
Finish, and Instant. The below table describes each of these Stop Mode options.
OPTION STOP MODE DESCRIPTION
FAd
Fade Performs a 10 second fade out then stops.
Fin
Finish Finishes playing the loop in its entirety then stops.
InS
Instant Loop stops playing instantly.
To change the Stop Mode of a loop:
1. Select the desired memory location
using the <UP/DOWN> buttons.
2. Press the <SETUP> button five times
or until StP appears in the display.
3. Press the <UP/DOWN> buttons to
select the desired Stop Mode.
4. Once the desired selection has been
made, press the <PEDAL SWITCH>
to exit the Setup menu.
5. Play and stop the loop using the
<PEDAL SWITCH> to audition the
change.
6. Press the <STORE> button twice if
you wish to store the changes.