User Manual
Table Of Contents
- Introduction
- Features
- Included Items
- User Interface & Connectors
- Connection Diagrams
- Quick Start
- Operation
- Selecting a Loop in Memory
- Free-Form vs Auto Quantized Looping
- Recording a Loop (Free-Form)
- Recording a Loop Using Auto Record
- Recording a Loop (Auto Quantize)
- Recording a Loop Using Pedal Tempo (Auto Quantize)
- Recording a Loop Using the AUX IN Jack
- Multiple Loop Playback (Cueing Loops)
- Recording Overdubs
- Undo, Redo, & Clear
- Time Stretching a Phrase
- Storing a Loop
- Copying a Loop
- Deleting a Loop
- Erasing All Loops (Internal Memory)
- Erasing All Loops (External Memory Card)
- Using JamSync
- Setup
- External Micro SD/SDHC Memory Cards
- JamManager XT Librarian Software
- Optional FS3X Footswitch
- Factory Restore
- Specifications
46
To select a Rhythm Type:
1. Select the desired memory location
using the <UP/DOWN> buttons.
2. Turn the <RHYTHM LEVEL> control
to the 9 o’clock position.
3. Press the <TEMPO> button at the
rate you want the phrase tempo to be.
This will set the tempo. The TEMPO
button LED will now be flashing to the
beat of the tempo.
4. Press the <SETUP> button four times,
or until rHy appears in the display.
5. Press the <UP/DOWN> buttons to
audition each pattern.
6. Once the desired rhythm type is
selected, press the <STORE> button
twice to store the changes or press
the <PEDAL SWITCH> to exit the
Setup menu without storing.