User Manual
Table Of Contents
- Introduction
- Features
- Included Items
- User Interface & Connectors
- Connection Diagrams
- Quick Start
- Operation
- Selecting a Loop in Memory
- Free-Form vs Auto Quantized Looping
- Recording a Loop (Free-Form)
- Recording a Loop Using Auto Record
- Recording a Loop (Auto Quantize)
- Recording a Loop Using Pedal Tempo (Auto Quantize)
- Recording a Loop Using the AUX IN Jack
- Multiple Loop Playback (Cueing Loops)
- Recording Overdubs
- Undo, Redo, & Clear
- Time Stretching a Phrase
- Storing a Loop
- Copying a Loop
- Deleting a Loop
- Erasing All Loops (Internal Memory)
- Erasing All Loops (External Memory Card)
- Using JamSync
- Setup
- External Micro SD/SDHC Memory Cards
- JamManager XT Librarian Software
- Optional FS3X Footswitch
- Factory Restore
- Specifications
33
For information on verifying or changing the settings in the previous table, see “
Setup”.
When recording to multiple JamSync compatible devices, there are two methods for
recording:
1. Record to the Master, set playback on the Master, then arm and record to the Slave.
2. Sequentially record on the Master then the Slave by arming the Slave for record
first then begin recording on the Master (using this method, loop recording will
begin on the slave device as soon as the loop end point is set on the master device).
The following sections will describe how to record to synced JamMan Solo XTs using
the above JamSync recording methods.