User Manual
Table Of Contents
- Introduction
- Features
- Included Items
- User Interface & Connectors
- Connection Diagrams
- Quick Start
- Operation
- Selecting a Loop in Memory
- Free-Form vs Auto Quantized Looping
- Recording a Loop (Free-Form)
- Recording a Loop Using Auto Record
- Recording a Loop (Auto Quantize)
- Recording a Loop Using Pedal Tempo (Auto Quantize)
- Recording a Loop Using the AUX IN Jack
- Multiple Loop Playback (Cueing Loops)
- Recording Overdubs
- Undo, Redo, & Clear
- Time Stretching a Phrase
- Storing a Loop
- Copying a Loop
- Deleting a Loop
- Erasing All Loops (Internal Memory)
- Erasing All Loops (External Memory Card)
- Using JamSync
- Setup
- External Micro SD/SDHC Memory Cards
- JamManager XT Librarian Software
- Optional FS3X Footswitch
- Factory Restore
- Specifications
22
To record an overdub:
1. Press the <PEDAL SWITCH> to
initiate playback of the loop, indicated
by a solid green STATUS LED.
2. Press the <PEDAL SWITCH> again
when you want to start overdubbing.
Overdub recording will be indicated
by a solid yellow STATUS LED.
3. As soon as you’re done overdubbing,
press the <PEDAL SWITCH> again.
Anything played while overdub was
active is now heard with the recorded
phrase.
4. To add additional overdubs, repeat
steps 2 and 3.
5. Quickly press the <PEDAL SWITCH>
twice to stop loop playback.
6. Press the <STORE> button twice if
you wish to store the loop.
NOTE: Each time an overdub is added, the last overdub is merged with the original loop and it can
no longer be undone using the Undo feature.