User Manual
Table Of Contents
- Introduction
- Features
- Included Items
- User Interface & Connectors
- Connection Diagrams
- Quick Start
- Operation
- Selecting a Loop in Memory
- Free-Form vs Auto Quantized Looping
- Recording a Loop (Free-Form)
- Recording a Loop Using Auto Record
- Recording a Loop (Auto Quantize)
- Recording a Loop Using Pedal Tempo (Auto Quantize)
- Recording a Loop Using the AUX IN Jack
- Multiple Loop Playback (Cueing Loops)
- Recording Overdubs
- Undo, Redo, & Clear
- Time Stretching a Phrase
- Storing a Loop
- Copying a Loop
- Deleting a Loop
- Erasing All Loops (Internal Memory)
- Erasing All Loops (External Memory Card)
- Using JamSync
- Setup
- External Micro SD/SDHC Memory Cards
- JamManager XT Librarian Software
- Optional FS3X Footswitch
- Factory Restore
- Specifications
19
Recording a Loop Using the AUX IN Jack
The JamMan Solo XT can record stereo loops using the AUX IN 1/8” mini jack. This
jack can be connected to portable music players for practicing or learning new songs.
Recording loops from the AUX IN jack is the same as recording your instrument
loops using the 1/4” LEFT/RIGHT INPUT jacks. It is recommended to use the Auto
Record option when recording from the AUX IN jack (see “Setup > Auto Record” for
information on enabling Auto Record).
To record a loop from the AUX IN jack:
1. Select an empty memory location
using the <UP/DOWN> buttons
(LOOP and SINGLE LEDs will be off).
2. Press the <PEDAL SWITCH> to arm
the recording, indicated by a flashing
red STATUS LED.
3. Press play on your portable music
player.
4. As soon as you’re done recording,
press the <PEDAL SWITCH> again to
stop recording and initiate playback.
5. Quickly press the <PEDAL SWITCH>
twice to stop loop playback.
6. Press the <STORE> button twice if
you wish to store the loop.