User Manual
Table Of Contents
- Introduction
- Features
- Included Items
- User Interface & Connectors
- Connection Diagrams
- Quick Start
- Operation
- Selecting a Loop in Memory
- Free-Form vs Auto Quantized Looping
- Recording a Loop (Free-Form)
- Recording a Loop Using Auto Record
- Recording a Loop (Auto Quantize)
- Recording a Loop Using Pedal Tempo (Auto Quantize)
- Recording a Loop Using the AUX IN Jack
- Multiple Loop Playback (Cueing Loops)
- Recording Overdubs
- Undo, Redo, & Clear
- Time Stretching a Phrase
- Storing a Loop
- Copying a Loop
- Deleting a Loop
- Erasing All Loops (Internal Memory)
- Erasing All Loops (External Memory Card)
- Using JamSync
- Setup
- External Micro SD/SDHC Memory Cards
- JamManager XT Librarian Software
- Optional FS3X Footswitch
- Factory Restore
- Specifications
13
Operation
Selecting a Loop in Memory
To select loops, press the <UP> and <DOWN> buttons. As you press these buttons
the LED display will update, showing the currently selected memory location number.
You can also press and hold these buttons to scroll through all the loop memories.
When Loop 200 is reached, pressing the <UP> button will cause the loop memories
to wrap around and return to Loop 1. Likewise, if Loop 1 is reached, pressing the
<DOWN> button will wrap the other way, returning to Loop 200.
If an optional memory card has been installed, pressing the <UP> and <DOWN>
buttons will alternate through one bank of memories and then the next (1-200
internal, then 1-200 external). The CARD MEM LED will light when memories are
selected on the external memory card.