User Manual

21
Compressor
A Compressor is used to automatically limit the dynamic level of the bass signal. The Com-
pressor effect has 110 different settings (00-99; F0-F9).The first digit represents the crossover
frequency. Any signal below this frequency is compressed. The second digit (0-9) increases the
amount of compression. (Example: A compressor setting of 62 would be a crossover frequency of
400 Hz with a compression amount of 2.)
The settings for the compressor effect are:
 Compressor is turned off
 50Hz
 63Hz
 80Hz
 100Hz
 160Hz
 250Hz
 400Hz
 630Hz
 1kHz
 1.6kHz
 Full Range